Ponoka · Concrete
Concrete built for Ponoka’s working land.
Driveways and patios in town. Shop pads, machinery aprons, and acreage driveways on the farms and properties around it. Poured on proper base, reinforced for Alberta freeze-thaw.
10+
Years pouring concrete
32 MPa
Cold-climate mix, every pour
BBB
Accredited business
JFK Surfaces in Ponoka
A rodeo town with a lot of farmland around it.
Ponoka is best known for the Ponoka Stampede, but most of our work in the area is quieter than that — residential driveways and patios in town, and shop pads, machinery aprons, and acreage driveways on the farms surrounding it. Both need the same thing done right underneath them.
We spec every pour to what it actually has to carry — a standard 4-5" residential slab for a driveway, or a thicker, heavier-reinforced pour for a shop floor holding equipment. We don’t use one template for both.
We don’t quote concrete over the phone. We come out, walk the site, and put a real number on paper. Free, no pressure.
Ponoka concrete work
What we pour and finish.
01
Driveways
Standard drives, extended pickup-friendly drives, RV pads. 4-5" on compacted gravel, sloped for drainage.
02
Patios & sidewalks
Backyard patios and walkways with expansion joints so freeze-thaw doesn't crack them apart.
03
Acreage driveways
Long rural driveways, pumper-truck pours where the ready-mix can't back in, gravel prep included.
04
Shop foundations
Custom-sized shop pads with frost footings and heavier rebar grid, speced to the machinery it'll hold.
05
Farm & equipment pads
Machinery storage pads and farm concrete built for real working weight and daily abuse.
06
Slab replacement
Saw-cut, break, and haul out old cracked or heaved concrete, then pour it right the second time.
What we plan for around Ponoka
Farms, acreages, and town lots.
Spec to the load. A residential driveway and a shop floor holding a tractor aren’t the same pour — thickness, rebar spacing, and base depth all change based on what’s actually going to sit on the slab.
Freeze-thaw doesn’t care what the slab is for. 32 MPa mix, correct drainage slope, and saw-cut control joints on every pour — residential or agricultural.
Acreage access. For rural properties around Ponoka, we confirm the ready-mix truck can reach the pour site and arrange a pumper truck where it can’t.
How we work
From call to poured concrete.
01
Call or text
Tell us what you need poured. A photo of the site helps.
02
Site visit
We measure, check grade and access, and talk through the spec.
03
Written quote
Real number in writing — size, thickness, prep, and timeline.
04
Poured & finished
Excavate, base, form, rebar, pour, finish, cure. Site left clean.
Who’s pouring your concrete
A family-run Central Alberta contractor.
JFK Surfaces was established October 1, 2018 by Fabien Joseph Quesnel and Kyla Peters. In 2024 we relocated to 36009 Highway 2A in Red Deer County, serving Ponoka and every town in between.
Licensed. Insured. WCB covered. BBB accredited. Fabien brings 10+ years of hands-on trade experience. Every pour is quoted, prepped, and finished by our own crew — not subbed out.
Also building in Ponoka? See our Ponoka garage builds page.
Common questions
What Ponoka-area folks ask us most.
Do you pour concrete driveways and patios in Ponoka?
+
Yes. We pour residential driveways, patios, and sidewalks in Ponoka, plus shop pads, machinery aprons, and acreage driveways on the properties surrounding town. Same standard for both — proper base, proper compaction, correct reinforcement.
Can you pour a shop or equipment pad for a Ponoka-area acreage?
+
Yes. Ponoka is surrounded by working farms and acreages, so we regularly pour shop foundations and machinery pads — frost footings, heavier rebar grid, and a thicker pour sized to what's actually going to sit on it.
How much does concrete cost in Ponoka?
+
It depends on size, thickness, base condition, and truck access — things we can only assess on-site. We don't quote concrete over the phone or online. We come out, walk the property, and give you a real written number, free and no pressure.
What's the concrete pouring season around Ponoka?
+
Roughly April through October, sometimes into early November if the weather cooperates. Concrete needs above-freezing temperatures through the first several days of cure — we can manage cooler pours with blankets and hot-water mixes but won't push into hard frost.
Do you pour concrete for acreages between Ponoka and Highway 2A?
+
Yes — that corridor is close to our Red Deer County base, so it's a regular service area. Long acreage driveways, shop pads, and farm concrete included.
See our full concrete services overview or read grain bin pad specs by bushel capacity.
Ponoka concrete quote
Come look at your site. Free.
Every concrete job is different. Call Fabien or text a photo of the site — we’ll come measure and give you a real number in writing.