Central Alberta · Siding
Siding that handles Alberta weather.
Vinyl, fiber cement, board-and-batten, and metal siding — properly flashed, wrapped, and detailed so it holds up to wind, hail, and freeze-thaw, not just the first summer.
10+
Years in the trades
13
Central AB towns served
BBB
Accredited business
JFK Surfaces siding
The finish is only as good as what's underneath it.
Siding takes the brunt of an Alberta exterior — wind-driven rain, hail, UV, and decades of freeze-thaw. The material you pick matters, but the install matters more: proper house wrap, correctly lapped and fastened panels, and flashing around every window and door that actually sheds water instead of trapping it.
We install and re-side homes across Red Deer, Innisfail, Sylvan Lake, Lacombe, Olds, Ponoka, Blackfalds, Penhold, and the acreages and farms between them. Vinyl, fiber cement, board-and-batten, or metal — whichever fits your home and budget.
We don’t quote siding over the phone. Every house is different — square footage, trim detail, what’s underneath the existing siding. We come look, measure, and give you a real number in writing. Free, no pressure.
Siding materials
Every material, installed properly.
01
Vinyl siding
Lowest upfront cost, 20-30 year lifespan, low maintenance. The right call for most budget-conscious re-sides.
02
Fiber cement
Higher upfront cost, better impact and hail resistance, stronger resale value. Built for long-term ownership.
03
Board-and-batten
Modern farmhouse look, popular on acreages and new builds. Vertical panels with battens over the seams.
04
Metal siding
Shops, garages, and accent walls that need to shrug off heavy wear and Alberta hail.
05
Soffit, fascia & eaves
Quoted and installed alongside siding so the whole exterior transitions cleanly, not as a mismatched afterthought.
06
Full tear-off & re-side
Old siding removed, sheathing checked for rot, proper house wrap installed, then re-sided right.
What we plan for
Wind, hail, and freeze-thaw.
Proper house wrap. Every tear-off gets a fresh weather-resistant barrier before siding goes back on — the single biggest factor in how long a siding job actually lasts.
Flashing that sheds water. Windows, doors, and any wall penetration get flashed first, siding second. Skip this step and water finds its way behind the panels within a few winters.
Fastening for wind. Panels nailed to manufacturer spec, not just “tight enough” — Central Alberta wind will find any siding job that was rushed.
How we work
From call to new siding.
01
Call or text
Tell us what's going on with your current siding. A photo of the house helps.
02
Site visit
We measure, check the wall assembly, and walk through material options.
03
Written quote
Real number in writing — material, tear-off scope, and timeline.
04
Installed & finished
Tear-off (if needed), wrap, flash, install, trim out. Site left clean.
Who’s siding your home
A crew that’s actually local.
JFK Surfaces was established October 1, 2018 by Fabien Joseph Quesnel and Kyla Peters. In 2024 we relocated to 36009 Highway 2A in Red Deer County — central to every town we serve.
Licensed. Insured. WCB covered. BBB accredited. Fabien brings 10+ years of hands-on trade experience. Every job is quoted, prepped, and finished by our own crew.
Doing siding and windows at the same time? See our window replacement page or our roofing services.
Common questions
What Central Alberta homeowners ask us most.
What's the best siding material for Alberta weather?
+
It depends on your budget and timeline. Vinyl is the lowest upfront cost with a 20-30 year lifespan and low maintenance. Fiber cement costs more but holds up better in hail-prone areas, resists impact damage, and typically adds more resale value. We walk you through both honestly based on your property and budget — see our full breakdown on the blog.
Do you install board-and-batten or metal siding too?
+
Yes. Beyond standard vinyl and fiber cement, we install board-and-batten for a modern farmhouse look and metal siding for shops, garages, and accent walls that need to handle heavy wear.
Can you re-side a house without tearing off the old siding?
+
Sometimes, if the existing wall assembly and sheathing are in good shape. More often we recommend a full tear-off so we can check for rot, re-wrap with proper house wrap, and flash windows and doors correctly — skipping that step is where most siding jobs fail early.
How long does a siding job take?
+
A typical single-family home takes about 1-2 weeks depending on size, material, and weather. We give you a real timeline once we've measured the house and confirmed material lead times.
Do you handle the trim, soffit, and fascia too?
+
Yes — siding, soffit, fascia, and eaves detailing are quoted and installed together so the whole exterior transitions cleanly, not as separate jobs that don't match.
Read our full breakdown of vinyl vs. fiber cement siding in Alberta’s climate or see all of our exterior services.
Siding quote
Come look at your house. Free.
Every home is different. Call Fabien or text a photo of the house — we’ll come measure and give you a real number in writing.